Peramin® DEFOAM
Peramin DEFOAM are defoamers for flooring compounds and drymix mortars
Peramin DEFOAM range of defoamers for use in flooring compounds, as well as other types of drymix mortars, guarantees a smooth and defect-free surface appearance by helping formulators reduce foaming and control any entrapped air that appears in fresh mortars during mixing with water. In addition, it contributes to improving the flowability of the mixed product.
Peramin DEFOAM range can also be used in combination or association with Peramin® SMF, Conpac, AXL and SRA additives.
Peramin DEFOAM products offer a good dispersion of binders and slightly improved fluidity, greater density and improvement of mechanical strength, zero impact on setting time and a high quality finish of self-leveling systems. They are also fully compatible with all our superplasticizers Peramin Conpac and Peramin SMF ranges.
There are five main products in the Peramin DEFOAM range.
Peramin® DEFOAM 50PE is the reference defoamer for all types of applications available in powder form.
Peramin® DEFOAM 51PE is a powdered defoamer with a low Volatile Organic Compound (VOC) emission level.
Peramin® DEFOAM 52PH is a powdered defoamer recommended for hot climate applications.
Peramin® DEFOAM 54PE-LC is a powdered defoamer that offers the most cost-effective performance for all types of applications.
Peramin® DEFOAM 56PE is the most cost efficient defoamer for all types of applications available in powder form.
Key benefits
- Good dispersion of binders and slightly improves the fluidity
- Greater density and improvement of mechanical strength
- No impact on setting time
- High quality finish of self-leveling systems
| Peramin® DEFOAM 50PE | Peramin® DEFOAM 51PE | Peramin® DEFOAM 52PH | Peramin® DEFOAM 54PE-LC | Peramin® DEFOAM 56PE | |
|---|---|---|---|---|---|
| Appearance | Off white powder | Off white powder | Off white powder | Yellowish to brownish powder | Off white powder |
| Active matter % | 57 - 63 | 53 - 59 | 47 - 53 | 49 - 57 | 55 - 65 |
| pH (5% solution) | 6.5 - 8.5 | 6.0 - 8.0 | 7.5 - 9.5 | 7.0 - 8.5 | 6.5 -9.5 |
| Bulk density | 0.50 - 0.70 | 0.40 - 0.60 | 0.50 - 0.60 | 0.58 - 0.72 | 0.50 - 0.80 |
| Granulometry (% > 600 µm) | < 1% | < 1% | < 1% | < 1% | < 1% |
